MODELS:

125F: Cast Iron (ASTM A126-B)
125FB: Bronze (ASTM B62, type 85-5-5-5)
125FCS: Carbon Steel (ASTM A216, Gr. WCB)
125FSS: Stainless Steel (ASTM A351, Gr. CF8M)


WOG PRESSURE- TEMPERATURE RATINGS
(Note: the 125 series is not
recommended for steam)
125F: Cast Iron 200 psi @ 150°F
125FB: Bronze 225 psi @ 150°F
125FCS: Carbon Steel 285 psi @ 100°F
125FSS: Stainless Steel 275 psi @ 100°F

cast iron y-type strainer,simplex basket, duplex basket,orfice plates

cast iron y-type strainer,simplex basket, duplex basket,orfice plates

DIMENSIONS & WEIGHTS ARE APPROXIMATE

(Apply for certified drawings)


SERVICE RECOMMENDATIONS

These strainers are used to remove foreign matter from pipe lines and provide inexpensive protection to pumps, meters, valves, etc. In appropriate material, the 125F series can be specified for drinking water, cooling water, sea water, etc.

FEATURES

These strainers have been designed for applications where easy maintenance & large capacity straining are needed. Service time is minimal because the cover is secured with quick opening, non-yoke type knobs. Both the cover & the basket use O-ring seals, eliminating the need to replace gaskets each time the strainer is serviced. This, combined with the machined basket sheet, eliminates particle bypass. With the appropriate wire mesh lining, these models can be used to strain particles as small as five microns.

CONSTRUCTION

Cast cover and body. All sizes feature an O-ring cover seal. Baskets and O-ring are sealed in machined seats. Quick release knobs are insert molded with metal threads. A plugged NPT connection is provided ("D"). Coatings are available on application. Standard basket is .062 perf 304 ss for sizes 1" thru 4" . Sizes 5" and larger have 1/8" perf 304 ss baskets. Buna-N O-ring is standard for all models except stainless steel, which is supplied with a Viton O-ring. Floor supports with bolting holes are provided on sizes 4" and larger.

CAPACITY: Minimum 6 to 1 open area ratio.


SIZE in. 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"
mm 25 32 40 50 65 80 100 125 150 200
A 5 11/16 6 15/16 6 15/16 9 10 3/8 11 3/4 15 18 3/8 20 1/4 27 3/8
B 4 11/16 6 1/2 6 1/2 7 7/8 8 3/4 11 3/8 15 7/8 18 3/8 22 3/8 27 3/4
C 2 3/4 3 3 3 5/8 4 4 1/2 5 3/4 7 7/16 8 3/16 9 3/16
D (npt) 3/8 1/2 1/2 3/4 1 1 2 2 2 2
WEIGHTS (lb.)
Cast Iron 9 15 15 26 38 62 118 170 266 518
Bronze 11 18 18 31 45 72 147 210 315 553
Carbon/Stainless 10 16 16 25 41 65 135 190 270 497

Click Here for Threaded Simplex Basket Strainer


FABROTECH INDUSTRIES, INC.
2089 Ninth Ave.
Ronkonkoma, NY 11779
Telephone (631) 467-2040
Secondary (631) 467-2046
Fax (631) 467-2196
1-800-313-0153

E-Mail: info@fabrotech.com